TROQUE FOR SCREWS -BOLTS

 
     
 Screws/Bolts    Quality    Description    With micro-
encapsulation		    No microen-
capsulation
---------------------------- ------------- ------------------------ ----------------------- -------------------------
 Nut M 12       Belts overlapped
Lacing
      95-100 Nm **
 M 6 x 20mm   8.8   Lacing  
10 Nm
  8,5 Nm
 M 8 x 25/30mm   8.8   Lacing and
Side Parts
  
25 Nm
  16 Nm
 M 8 x 55/65mm   8.8   Side Parts  
25 Nm
  16 Nm
 M 10 x 35mm   8.8   Cleats  
60 Nm
  50 Nm
 M 10 x 45mm   8.8   Tire-Guide  
60 Nm
  50 Nm
 M 10 x 35mm   A2/80   Cleat  
50 Nm
  45 Nm
 M 10 x 45mm   A2/80   Tire-Guide  
50 Nm
  45 Nm
 M 10 x 55mm   A2/80   Cleat  
50 Nm
  45 Nm
 M 10 x 65mm   8.8   Tire-Guide  
60 Nm
  50 Nm
 M 12 x 35mm   8.8   Cleat  
90 Nm
  75 Nm
 M 12 x 38mm   8.8   Cleat  
90 Nm
  75 Nm
 M 12 x 40mm Ripp   100   Tire-Guide  
--
   130 Nm
 M 12 x 48mm   8.8   Cleat  
90 Nm
  75 Nm
 M 12 x 50 mm Ripp   100   Tire-Guide  
--
   130 Nm
 M 12 x 53mm   8.8   Tire-Guide  
90 Nm
  75 Nm
 M 12 x 55mm   8.8   Cleat  
90 Nm
  75 Nm
 M 12 x 70mm   8.8   Tire-Guide  
90 Nm
  75 Nm
 M 14 x 60mm   8.8   Tire-Guide TITAN
  
  140 Nm
  95 Nm

 M 14 x 40mm

   8.8   Cleat TITAN  
  120 Nm
   

Tolerance +/- 5 Nm

After 150-200 operation hours please check screws if they are still tight . If not please tighten
them again. In the rotation of max. 400 operating hours please control firm seat and pull them
tight if necessary.

** controll firm seat after 50 working-hours. If neccessary pull tight again.

        print